0 item(s) in Cart  -  $0
High Performance Kit for Ruger 22/45

High Performance Kit for Ruger 22/45

Part Number:COMBON0024
Average Rating
5
0
5
Your Price: $99.99
Retail Price:$107.94
Your Savings:$7.95(7%)
In Stock

Choose Options

Item6

Feature:

B1
This combo contains:
  • 1 Steel Hammer Bushing for the Mark III 22/45
  • 1 "Kanewolf" Slingshot upgrade
  • 1 LCI replacement in black OR stainless steel
  • 1 "Firestarter" Titanium Firing Pin
  • 1 "Eagle Talon" Extractor
  • 1 Extended Magazine Release
Don't forget, all TANDEMKROSS products come with a LIFETIME guarantee!

Product Information:

Steel Hammer Bushing:

  • Magazines will slip right out
  • Easier takedown and cleaning
  • Can reduce failure to feeds
  • Comes with colored installation instructions

This high quality 304 stainless steel bushing is made for high duty cycle shooting and replaces the Ruger factory bushing allowing you to safely remove the Magazine Disconnect from the firearm. There are instructions on the internet showing the use of washers and other parts, but this is unreliable and unsafe! Use an actual part that is designed for the job. This bushing lets the hammer move properly and at the correct speed.  You will be pleased with the fit and final result with this bushing.  If you know how to clean this gun you can easily remove the disconnect.  Removing the disconnect allows the magazines to fall free, allows them to seat properly and does allow the gun to fire with the magazine out for tactical competition and self-defense scenarios.  Check to see if your state requires the magazine disconnect installed if the firearm is ever resold.  

Supported Model List: 

MKIII -ALL MODELS!
  • MKIII 22-45
  • MKIII 22-45 Competition
  • MKIII 22-45 Government Target
  • MKIII 22-45 Target
  • MKIII Competition
  • MKIII Government Target
  • MKIII Target
  • MKIII LITE
  • MKIII Hunter
"Kanewolf" Slingshot Upgrade:

  • Enables "sling shot" loading action
  • Eliminates unnecessary wear on bolt catch and bolt face
  • Does not affect last round hold open mechanism
  • Installs in minutes


In most modern firearms its common for the user to be able to pull back on the slide and release to load the first round into the chamber. This is often referred to as "sling shot" action. Frustratingly enough, for the Ruger 22/45 this is not the case. The design of the bolt stop forces the shooter to press on the slide release to load the first round. Unfortunately, in the case the user does not first pull the bolt back this action can result in wear on the bolt stop and bolt face. The "KaneWolf" part kit installs in minutes and allows Ruger 22/45 owners to perform reliable and consistent "sling shot" action. With a specially designed bolt stop that is spring assisted your Ruger 22/45 can function just like any other modern firearm today. All other functions of the pistol are completely unaffected, including the last round hold open. 


Please note that this part kit is designed to fit all Ruger polymer frame Mark III 22/45 model pistols.


"Firestarter" Titanium Firing Pin:
  • Titanium is 40% lighter than steel  
  • Helps reduce lock time for higher accuracy
  • Non-corrosive and highly durable
  • TANDEMKROSS LIFETIME guarantee

The TANDEMKROSS "Fire Starter" Titanium firing pin is a drop in replacement for the factory firing pin.  A titanium firing pin is lighter and moves faster than a heavier steel pin.  This reduces lock time and allows the gun to go off faster which can help to improve accuracy.  The lighter titanium pin is resistant to mushrooming and will provide repeatability with positive primer strikes.  With less deformation of the casing due to the lighter weight of the firing pin it can also lead to better extraction.  The stability of titanium over steel makes it an ideal choice of material when operating in extreme heat or cold conditions.

"Eagle Talon" Extractor:

  • Machined from hardened tool steel to last a lifetime
  • Unique positive "hook" design grabs casings securely and surely
  • Reduces failures-to-eject and "stove-pipe" malfunctions

The TANDEMKROSS "Eagle's Talon" Extractor is a much needed reliability upgrade that replaces the stamped factory provided extractor.  Often the factory extractor won't maintain a secure enough hold on the spent casing as the pistol is cycling and will case stove-pipes and failures-to-eject malfunctions.  Luckily with this simple to install and affordable upgrade, you can greatly improve the reliability of your firearm!  TANDEMKROSS "Eagle's Talon" Extractor is correctly machined with a positive hook that will grab and secure each round until it needs to be ejected.  Eliminate your frustrations at the range with a much better part that will throw your spent cases far away from ever causing another failure-to-eject!

Extended Magazine Release:

  • Hardened Steel made to last
  • Black Oxide Coating
  • Longer than the original to accommodate thick grips and provide easier access
If you have a thicker target grip panel on your Ruger 22/45 or you just would like to make it easier to get to the magazine release for competition shoots the TANDEMKROSS extended magazine release is a simple upgrade.  This extended release gives you a wider face on the button as well as doubles the height of the original button.

The design also matches the button face on the Kanewolf part from TANDEMKROSS to improve the look of your gun.

Loaded Chamber Indicator Replacement Insert:

  • Replaces plastic LCI (Loaded Chamber Indicator)
  • Can reduce misfeeding and ejection problems
  • Simplifies cleaning
  • Improves exterior aesthetics


This high quality steel replacement insert for the 22/45 and Mark III series pistol will allow you to remove the existing plastic parts and simplify cleaning. Installs in minutes; this part ships with color instructions, set screw and allen wrench to get the job done.  Improve the appearance and make cleaning easy by upgrading your pistol today.

 

*Note:  This part disables the Loaded Chamber Indicator feature.  Before ordering please check to see if your state requires this feature by law.





5 Stars
Retired
I installed the Combo High Performance Kit from Tandemkross in my Ruger 22/45. The kit was reasonably priced and shipped promptly. I also installed a set of Williams Fire Sights, Game Changer Compensator and Extended Magazine Bumper. Installation was easy due to both printed and video instructions. The various components made a marked improvement in performance. Tamdemkross is a great company to deal with.
Did you find this helpful?  28 of 28 Found Helpful
Reviewed by:  from Hiawassee, GA. on 8/6/2015
5
5 Stars
Love the Combo Kit, Victory Trigger, Hogue grip
I installed the High Performance Combo Kit for my Ruger 22/45 Lite. Loved the way it transformed the gun into what it should have been. Especially nice re-assembling the gun without having to do all the extraneous motions to get the mainspring back into its place. Then, I ordered the Victory trigger and a Hogue grip. All shipped and arrived VERY QUICKLY! These three products completely transform the 22/45 Lite into a terrific pistol. Fun to shoot, more accurate, much better to operate. I also appreciated the videos and the clear printed instructions. I've never done any significant gunsmithing before, and the videos made it all real easy. If you have a Ruger Mark III 22/45 Lite, I highly recommend you buy these three products.
Did you find this helpful?  15 of 16 Found Helpful
Reviewed by:  from Boise, ID. on 8/29/2015
5
5 Stars
If You're Not Sure, Think No More!
Best complete upgrade parts kit I've bought. It turns your 22/45 into a new beast! This in conjunction with the Victory trigger is the best thing you could do. Install videos on the website are great to follow along with you need to. I posted a before, in progress, and after video on my YouTube channel Steve_MP5 for anyone that wants to see the difference!
Did you find this helpful?  5 of 5 Found Helpful
Reviewed by:  from Pennsylvania . on 1/18/2016
5
5 Stars
Perfect kit to make a good gun GREAT!!!!
I've upgraded most of my guns in one way or another and when I picked up a new 22/45 LITE to add a suppressor I was disappointed in how the stock gun operated. My other Ruger 22's are all MARK II's. This kit REALLY makes the 22/45 act like it should from the factory. Drops the mags, and the "slingshot"mod was great. I'm no gunsmith but if you take your time it works as described. Good investment.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from Hot Springs Village, AR. on 6/4/2016
5
5 Stars
Sarge
Excellentl kit being Installed by my gunsmith friend. The extended mag release is not black it is a gray steel unattractive looking piece, just rattle can it satin black before install. I ordered mine both through Amazon and each kit was 10 dollars more so it seems cheaper. The LCI is stainless and looks very nice, the picture of kit looks black but it is nice looking stainless. Will report back after range testing
Did you find this helpful?  3 of 4 Found Helpful
Reviewed by:  from Seattle. on 10/30/2015
5

Recently Viewed Items

Information
Browse By Category