0 item(s) in Cart  -  $0
KelTec KSG "Assure" Magazine Followers
Shotgun stainless steel follower for Remington and Browning and Mossburg and many other 12 guage shotguns for easier cleaning and improved performance.

KelTec KSG "Assure" Magazine Followers

Part Number:TK09N0053SSL1
Average Rating
5
0
5
Your Price: $24.99
Retail Price:$29.99
Your Savings:$5.00(17%)
In Stock

Feature:

S3
At a glance:
  • Replace the cheap and fragile factory plastic followers of the KSG
  • Built to eliminate dirt and debris
  • Less surface area and less drag for increased reliability
  • Provides a deep spring pocket to better control spring cycling
  • Made in the USA out of stainless steel
Package contains 2 followers.

The KelTec KSG is an incredible shotgun but has some limiting factors that affect reliability.  The stock plastic magazine tube followers have been known to affect feeding reliability.  With the TANDEMKROSS "Assure" Magazine Followers for your KSG, you can upgrade your shotgun and greatly improve shell feeding dependability.  Machined from stainless steel to exact tolerances, they are built to last a lifetime.  Unlike the original plastic followers, these will never break under spring pressure or degrade when cleaning solvents are used.  With the TANDEMKROSS "Assure" stainless steel magazine followers, it becomes easier to visually see and feel when the tube is empty.  The hole in the middle helps minimize debris buildup such as sand or shell fragments.   Whether you are a law enforcement officer, a skeet shooter, or a parent protecting your home and family; magazine feeding reliability is what you depend on.    Donâ€â„¢t settle for anything less and order today! 

Comes with colored installation instructions but we recommend a gunsmith install these parts!


5 Stars
Quality parts!
First I'll say that the stock KSG followers can't even compare to these SS parts, and when you remove the factory parts you'll see that for yourself. You could say that these followers are total overkill! Now for the pointers: You have to field strip the gun to install these followers. That's no big deal, just follow the manual. Where things get tricky is with the removal of the magazine plugs. They are finely threaded, tight and held with thread locker. You have to use a heat gun and devise a tool to fit the slot in the ends of the plugs to remove them. While a quarter fits in the slot nicely, you can't use one to loosen the plugs because it will bend (trust me). You need something made of steel (maybe a washer) held with vice grips, that fits the slot snugly, and that you can push down on while you turn. The plugs are not hardened and it would be very easy to bugger them up. Once you get them out you need to clean up the threads on the plugs and inside the mag tubes before you reinstall everything. Just a heads-up...
Did you find this helpful?  15 of 15 Found Helpful
Reviewed by: (Verified Buyer)  from Indiana. on 11/21/2014
5
5 Stars
none
I was having problems with my KSG not feeding correctly. I replaced the plastic followers with these stainless steel ones and now my KSG is feeding the way it should. It is a little hard getting the plastic followers out but it was well worth the effort.
Did you find this helpful?  8 of 8 Found Helpful
Reviewed by:  from 119 redstone lane. on 3/26/2014
5
5 Stars
Ksg follower
Quality product at a great price. Definitely worth replacing the stock plastic followers for these.
Did you find this helpful?  5 of 6 Found Helpful
Reviewed by:  from ny. on 3/28/2014
5
5 Stars
Magazine followers
Great upgrade part. Allows you to clean magazine tubes and lube followers and springs with dry lube if it starts to stick. Highly recommended.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from CA. on 6/5/2015
5
5 Stars
Superb Followers
I just got these for my new KSG and love them. I installed myself due to I have alot of experience with gunsmithing in general. I am really impressed by the quality of the machine job on these followers. Nice and smooth. Actually, if you own a KSG and are wanting to modify it, I would highly suggest starting with these followers as the first feature.I really feel they are much smoother in delivering and feeding your hulls through your mag tube then the stock nylon/plastic which cant buckle and wear down with friction and cause it to potentially bind up... But as suggested, if you are not familiar with gunsmithing, while the instructions are pretty clear, I would highly recommend taking to a gunsmith or a friend who does know about gunsmithing, due to the nature of complexity of the KSG itself. But once installed, expect some beautiful smooth feeding from your mag tubes... youll love them... The hollow center is a nice touch, as so you can feel under to check if the mag tube is empty if you didnt count shots, with out having to flip upside down to look...
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from Kentucky. on 12/18/2014
5

Customers who bought this also bought:

Eezox Synthetic Gun Oil 4 oz Can
Average Rating(14)
$7.99
In Stock
Patchworm Pocket Field Kit
Average Rating(7)
$9.99
In Stock
Average Rating(3)
$13.99
In Stock
 

Recently Viewed Items

Information
Browse By Category