KrossFire Bolt for Ruger® 10/22®
Product photo for “KrossFire” Bolt for Ruger® 10/22®

KrossFire Bolt for Ruger® 10/22®

Part Number:TK18N0122BLK1
Average Rating
5
0
5
Your Price: $139.99
In Stock


At a Glance:

  • Protective PVD coating and made of hardened steel for long life

  • TANDEMKROSS firing pin pre-installed and retained for consistent strikes

  • Precisely machined and radiused for smooth movement and hammer engagement


Both the Ruger® 10/22® and Ruger® 22 Charger™ are rimfire favorites for speed shooting competitions and recreational shooting. TANDEMKROSS’s precisely CNC-machined KrossFire Bolt for Ruger® 10/22® is the best way to optimize your rifle’s performance without taking your bolt to be reworked by an expert gunsmith!


Made in the USA with heat-treated billet steel, the KrossFire Bolt features a lateral retaining pin to prevent the firing pin from moving vertically. This ensures your firing pin only moves forwards and back as intended to provide more consistently positive primer strikes.


Additionally, the KrossFire Bolt also comes with TANDEMKROSS’s Fire Starter Titanium Firing Pin pre-installed! Being made of titanium makes the Fire Starter highly durable to last you a long time. This titanium firing pin is also lighter than steel to help reduce lock time and allow for faster consecutive shots on target.


A long-lasting bolt deserves long-lasting parts, so the KrossFire also comes with the TANDEMKROSS hardened tool steel Eagle’s Talon Extractor pre-installed. Highly resistant to wear and aggressively hooked to confidently secure cartridges, the Eagle’s Talon helps to reduce failures to extract.


The KrossFire’s new look offers more than just a good looking finish. The black PVD coating offers your precisely machined bolt with a protective coating to keep it running for as long as possible.


Lastly, the geometry of this upgraded bolt is incredibly important. The rear face is carefully radiused to provide a more forgiving point of contact with the hammer allowing for smoother cycling and charging. 10/22® fans also frequently get the headspace of their bolt reworked for optimal results, so we designed ours with those figures already in mind so no additional work needs to be done!


The TANDEMKROSS KrossFire Bolt for Ruger® 10/22® will support virtually all factory models of Ruger® 10/22® or 22 Charger™. So, get your upgraded bolt today and make your good gun great!


Supported Models:

  • Ruger® 10/22®

  • Ruger® 10/22® Carbine

  • Ruger® 10/22 Takedown®

  • Ruger® 10/22 Takedown LITE®

  • Ruger® 10/22® Compact

  • Ruger® 10/22® Tactical

  • Ruger® 10/22® Sporter

  • Ruger® 22 Charger™


The KrossFire Bolt is protected against mechanical failure for life by TANDEMKROSS’s Lifetime Guarantee. TANDEMKROSS firing pins, extractors, and springs are protected against mechanical failure for two years after the time of purchase. Learn more about our warranty and returns policies here.


WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
5 Stars
Very nice bolt!
I ordered the KrossFire bolt for a project I was working on and ordered a Kidd bolt at the same time for another project. I hadn't decided which one was going in the Takedown and which was going in the regular 10/22, but when they came in, the Takedown was the best choice. The bolt is very well made. The dimensions are perfect and it cycles very well. It's also been able to feed anything I throw at it in the past week, from bulk-pack ammo to SK and Eley Match. I've only had it a week, but I've fed about 500 rounds through the rifle and it's been great. I'm very glad I got in on this bolt early, as it's good value for what you receive. I highly recommend it and will likely be getting another one for another 10/22 project I have coming up.
Did you find this helpful?  73 of 74 Found Helpful
Reviewed by: (Verified Buyer)  from Powell, OH. on 8/18/2016
5
5 Stars
Competitive shooter
My granddaughter had been using a stock Ruger bolt in her 10/22 but had been having one to two failure to fire malfunctions in each rimfire challenge match, even with quality ammunition. Since switching to the Krossfire bolt, the ftf's have been cut to zero. The tighter headspace means every firing pin strike is identical to every other strike. It wasn't so with the factory bolt. Great product. I highly recommend it to anyone that demands consistent positive ignition.
Did you find this helpful?  68 of 68 Found Helpful
Reviewed by:  from Earlham, iowa. on 9/20/2016
5
5 Stars
TK 10/22 bolt
There is simply no comparison between the TK bolt and the factory bolt. If you shoot a 10/22, do yourself a favor and get this upgrade!!!!! The minute you lay the two bolts side by side you will notice the difference and understand why it's a needed improvement.
Did you find this helpful?  46 of 50 Found Helpful
Reviewed by:  from Arkansas. on 10/27/2016
5
5 Stars
Smooth as Silk
I replaced my stock bolt in my 50th Anniversary 10/22. its amazing how much smoother the avtion is. it cycles faster & it has consistent firing pin strikes. ive put over 1k of rounds thru the gun with no FTE's. I highly recommend this product. when I start my custom build this will be the bolt I use!
Did you find this helpful?  36 of 36 Found Helpful
Reviewed by: (Verified Buyer)  from McDonald, PA. on 9/12/2017
5
5 Stars
Mr
Very nice item as can be expected from Tandemkross. Shot about 200 rounds with it and it has worked flawlessly. Another Great item.
Did you find this helpful?  29 of 31 Found Helpful
Reviewed by:  from Susquehanna. on 3/4/2017
5

Customers who bought this also bought:

Ultimate Trigger Kit for Ruger® 10/22®
Average Rating(94)
$134.99
In Stock
Bolt Keeper Extended Bolt Lock for Ruger® 10/22®
Average Rating(73)
$24.99
In Stock

Recently Viewed Items

Information
Browse By Category