Replace and upgrade your wearable and easy to loose internals parts with this essential 10/22 kit!
Upgrade to a TANDEMKROSS "Fire Starter" Ruger® 10/22® titanium firing pin and improve your internal Ruger® 10/22® parts even further. The durable, lightweight 10/22® titanium firing pin is resistant to mushrooming and can withstand both extreme cold and hot conditions, ensuring consistent positive primer strikes. The lighter weight firing pin reduces lock time, helping to boost accuracy.
Rebound Springs for Ruger® 10/22® 5 pack
As an owner of a Ruger® 10/22® rifle, it’s not uncommon to experience a broken or lost firing pin rebound spring. Stock up on replacement rebound springs and avoid the hassle of a missing or broken part when at the range or working on your gun.
These Ruger® 10/22® rebound springs match the factory rebound spring specifications for an ideal fit in your Ruger® 10/22®. These are a drop-in part that require no tools to install. The springs come five in a pack, to ensure you always have extras on hand.
"Green Springs" Rotary Magazine Springs 3 pack
Upgrade your Ruger®10/22 rotary magazines with aftermarket Ruger® 10/22 rotary magazine torsion springs from TANDEMKROSS. Every time a magazine is fully loaded it reduces the output torque of the spring by a very small amount. Over time and many cycles the reduction in torque affects the reliability of the magazine.
The new replacement rotary magazine torsion spring are wound with missile wire to prolong spring life and provide long lasting performance.
The green color of the magazine springs is a simple way to show your #TANDEMIZED pride and keep your upgraded springs separate from factory springs.
Upgraded Magazine Release KrossPins 2 pack
Put a stop to a lost magazine release pin with the new upgraded 10/22™Magazine Release "Kross Pin" from TANDEMKROSS.
These highly durable pins feature a spring-loaded ball detent that holds them securely in place inside the magazine assembly but still allow for easy insertion and removal when working on your rifle.
These upgraded 10/22™ receiver cross pins are a must-have for any Ruger® 10/22™owner who loves to work on and upgrade their gun!
Upgraded Receiver KrossPins -2 pack
If you’ve upgraded your Ruger® 10/22™ with aftermarket parts and taken apart your trigger housing sub-assembly, it’s likely you’ve experienced just how easily the receiver cross pins can fall out of the sub-assembly. It’s easy to lose these important pins while working on your gun - a loss that can easily derail a day at the range or even firearms competition while you wait for replacement parts.
Put a stop to lost receiver cross pins with the new upgraded 10/22™ "KrossPins" from TANDEMKROSS. These upgraded galvanized steel pins are highly durable and feature a spring-loaded ball detent that holds the pins securely in place inside the sub-assembly but still allow for easy insertion and removal for working on your rifle.
These upgraded 10/22™ receiver cross pins are a must-have for any Ruger® 10/22™owner who loves to work on and upgrade their gun! Put a stop to missing pins and make firearms maintenance easier. Stock up now!
Replacement Sear Springs - 3 pack
When you’re training or competing in a rimfire competition, the last thing you want is for broken or missing springs to slow you down. Ensure you always have the replacement parts you need for your Ruger® 10/22® maintenance with the latest replacement spring from TANDEMKROSS.
These Ruger® 10/22® Replacement Sear Springs are sold in a 3-pack, allowing you to stock up and always have the spring you need in your gun bag or workshop. The 10/22® sear springs match factory specs for the best possible fit in your 10/22® and are a simple, drop-in part.
Get the all the essential internal components and keep up with your firearm maintenance! Available this October only!