At a Glance:

Boost reliability and performance
Replace worn, damaged, or missing parts
Long lasting durability

Consistent reliability is the name of the game whether it be for competition, training, or any other good day at the range. The Essential Maintenance Kit is the key to getting just that for your Browning® Buck Mark.

Many internal parts can break, wear down, or even go missing over time. Make sure you’re never caught off guard when it happens by getting this kit of crucial, must-have parts.

This kit includes:

A titanium firing pin means a strong pin you can rely on, with reduced weight for decreased lock time. Additionally, the extractor is made of heavy duty steel for long life and reliability you can count on. Springs and plungers are easy to lose while breaking your pistol down for routine clean up. Now you can have your spare on deck!

*Fits all Post 2000 Buck Mark models including the Buck Mark Rifle

TANDEMKROSS firing pins, extractors, and springs are protected against mechanical failure for two years after the time of purchase. Learn more about our warranty and return policies here.

WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Buckmark Essentials

I installed on two different Buckmark pistols one functioned Perfect the other needed some refinement. It would not load ended up using old extractor with new springs and plunger. I would have filed the new extractor but at the range I only had my multitool file and it was to soft for the extractor.

Did you find this helpful? 3 of 3 Found Helpful

Reviewed by: Kirk from PROVO. on 7/20/2023

Maintenance kit for Browning Buckmark

Everything in this kit was top notch except for the extractor. After installation of all the parts, every time I racked the slide, the round wouldn't chamber. The extractor wouldn't allow the rim of the cartridge to slip past it to allow entry into the chamber. By process of elimination and replacing all the other parts I had installed, I replaced the extractor with the factory original and Buckmark performed flawlessly. I put the TANDEMKROSS extractor back into the slide and the rounds wouldn't chamber. I removed this extractor and reinstalled the factory original and my pistol performed flawlessly. I don't know what the difference was, because at this time I was pretty irritated and didn't remove the OEM extractor and hold it next to the replacement part to see what difference there may have been!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Virgil V Lester Jr from Sperry. on 9/20/2023